Specifications

Solid-state drive

Description Spare part number

512-GB, SATA-3, solid-state drive 752103-001

256-GB, SATA-3, SED, Opal 2, solid-state drive 761906-001

256-GB, SATA-3, SED solid-state drive 730567-001

240-GB, SATA-3, solid-state drive 730566-001

180-GB, SATA-3, SED, Opal 1, solid-state drive 775247-001

180-GB, SATA-3, solid-state drive 730765-001

128-GB, SATA-3, locked, Opal 2, solid-state drive 764507-001

128-GB, SATA-3, locked, solid-state drive 766679-001

128-GB, SATA-3, solid-state drive 744716-001

120-GB, mSATA-3, SED solid-state drive 730568-001

32-GB, SATA-3, solid-state drive 743008-001

Before removing the solid-state drive, follow these steps:

1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the service cover (see

Service cover on page 48).

5. Remove the battery (see

Battery on page 50).

Remove the solid-state drive:

1. Remove the Phillips PM2.0×2.5 screw (1) that secures the solid-state drive to the system board.

(The solid-state drive tilts up.)

Component replacement procedures