Technical data

49
5 Maintenance
pt
es
nl
it
fr
ru
en
de
k T Press the Rotary Switch to start cappuccino
frother cleaning.
CLEANER FOR CAPPU.
T Remove the milk pipe from the receptacle
with milk.
T Pour 250 ml of fresh water into a receptacle
and add one capful of milk system cleaner.
T Immerse the milk pipe in the receptacle.
T Place another receptacle under the dual
spout.
c T Press the Maintenance button.
CLEANING, the milk system and the pipe
are cleaned.
The operation is interrupted,
WATER FOR
CAPPUCCINO.
T Rinse the receptacle thoroughly, fill it with
250 ml of fresh water and immerse the milk
pipe in it.
T Empty the receptacle under the dual spout
and place it back underneath.
c T Press the Maintenance button.
CLEANING, the milk system and the pipe
are rinsed with fresh water.
The operation stops automatically.
READY
Dismantling and rinsing the dual spout
The dual spout must be dismantled and rinsed
daily if milk has been prepared to make sure it
functions perfectly and also in the interests of
hygiene. Your ENA will not prompt you to clean the
dual spout.
T Remove the milk pipe and rinse thoroughly
under running water.
micro 9
T Press the releasing devices and pull the dual
spout down and off.
T Push the milk system down and remove it.
T Dismantle the milk system into its individual
parts.
T Rinse all parts under running water. If there
are severely dried on milk residues, firstly
immerse the individual parts in JURA milk
system cleaner and then clean them
thoroughly.
T Fit the air intake pipe.