Technical data

47
4 Permanent settings in programming mode
pt
es
nl
it
fr
ru
en
de
Example: Change the setting such that cappuccino
frother rinsing is performed immediately after
preparation of a speciality coffee with milk.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
RINSES is
displayed.
k T Press the Rotary Switch to enter the
programme item.
INIT RINSE
g T Turn the Rotary Switch until C-RINSE is
displayed.
k T Press the Rotary Switch to enter the
programme item.
AFTER10'
g T Turn the Rotary Switch until NOW is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK
C-RINSE
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit the pro-
gramme item.
RINSES
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY
Unit for amount of water
You can change the unit for the amount of water
from ‘ml’ to ‘oz’.
Example: Change the unit for the amount of water
from
ML to OZ.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
DISPLAY is
displayed.
k T Press the Rotary Switch to enter the
programme item.
ML
g T Turn the Rotary Switch until OZ is displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the unit for the amount of water is set.
DISPLAY
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY
Language
In this programme item you can set the language
used by your ENA.
Example: Change the language from
ENGLISH
to
DEUTSCH.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
LANGUAGE
is displayed.
k T Press the Rotary Switch to enter the
programme item.
ENGLISH
g T Turn the Rotary Switch until DEUTSCH is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the language is set.
SPRACHE
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
BEREIT