Technical data

45
4 Permanent settings in programming mode
pt
es
nl
it
fr
ru
en
de
Example: Permanently change the coffee strength
(
FLAVOUR) for espresso from STRONG to
NORMAL.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
PRODUCT is
displayed.
k T Press the Rotary Switch to enter the
programme item.
SELECT BUTTON
E Next select the button of the product for
which you would like to make settings.
No product is prepared at this point.
< T Press the Espresso button.
ESPRESSO
WATER
g T Turn the Rotary Switch until FLAVOUR is
displayed.
k T Press the Rotary Switch to enter the
programme item.
STRONG
g T Turn the Rotary Switch until NORMAL is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the coffee strength is set.
FLAVOUR
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit the pro-
gramme item.
PRODUCT
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY
Setting the water hardness
E If you are using the CLARIS Blue filter
cartridge and have activated it in program-
ming mode, you will not be able to adjust
the water hardness.
The harder the water is, the more frequently the
ENA needs to be descaled. It is therefore important
to adjust the water hardness.
The water hardness can be adjusted on a continu-
ous scale between 1 °dH and 30 °dH.
Example: Change the water hardness setting from
16°dH to 25°dH.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
HARDNESS
is displayed.
k T Press the Rotary Switch to enter the
programme item.
16°dH
g T Turn the Rotary Switch until 25°dH is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the water hardness is set.
HARDNESS
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY