Phau Ntawv Qhia

EMX Industries, Inc. Tech support: 1216-518-9889 9/16
Document Number 10370104 Rev 1.1 [e-mail]
To cancel the Hold Command send SMS as follows:
9999release
The unit will reply by SMS:
Hold Command is OFF
13. OPEN TO ALL Command
The unit can be programmed so that it will open the gate to ANY incoming call (without checking
if the caller is an authorized user). You can activate or cancel this function by SMS command as
follows:
To activate the OPEN TO ALL command, send SMS as follows:
*Note: 9999 Is the password (default password 9999)
9999open
The unit will reply by SMS:
Open To All: is ON
To cancel OPEN TO ALL command, send SMS as follows:
9999close
The unit will reply by SMS:
Open To All: is OFF
14. How to set the unit to Factory Default Settings
To set the unit to “Factory Default Settings” means the unit will delete all the phone numbers
and reset all the functions to factory default parameters as it was supplied initially. To set the
unit to Factory Default you need to send the following SMS command:
*Note: 9999 Is the password (default password 9999)
9999default
The unit will reply by SMS:
THIS IS A WARNING. Do you wish to DELETE all the phone numbers and set the unit to
factory default ?
To proceed and factory reset the unit, you must confirm within 2 minutes
by SMS in all capital letters: