Manualshelf

Phau Ntawv Qhia

ManualsBrandsEMX INDUSTRIES ManualsAccess ControlEMX INDUSTRIES CellOpener-365 GSM Access Control
78910111213141516
EMX Industries, Inc. Tech support: 1216-518-9889 13/16
Document Number 10370104 Rev 1.1 technical@emxinc.com
TUE, WED, THU between 8:00AM and 13:00PM
FRI between 7:30AM and 15:00PM
That means: The relay of the weekly timer will turn ON at 09:00AM and turn OFF at 17:00PM on every Sunday, Monday,
and Saturday. Also, it will turn ON at 08:00AM and turn OFF at 13:00PM each Tuesday, Wednesday and Thursday.
And turn ON at 07:30AM and OFF at 15:00PM each Friday.
*Note: The following SMS command is wrong: 9999WT.0900.1700.1
27,0800.1300.234,0730.1500.6
This is because the command contains two time intervals for MONDAY.
b. How to Set the Weekly Timer for TWO Time Intervals Per Day
In order to set TWO time intervals for any day of the week, you would need to send TWO
separate SMS commands. The first SMS command should be the same as in the previous
example which needs to include the FIRST time interval of the day and the second SMS
command should be for the SECOND time interval as is shown in the following example.
How to set: Monday to Friday from 8:00AM till 9:00AM and from 3:00PM till 4:00PM
and Saturday and Sunday from 8:00AM till 5:00PM
You would need to send two separate SMS commands as follows:
First SMS:
9999WT.0800.0900.23456,0800.1700.17
Second SMS:
9999WT2.1500.1600.23456
The unit will confirm by sending SMS with the settings registered in the system.
*Note: When the unit’s relay is ON (active) by the weekly timer, the unit will not respond to incoming calls and will not
trigger the relay for any user. Instead, the unit will send the following SMS message to the user that made the call:
"Your call was disregarded as the TIMER is ON at the moment"
* Note: The last SMS programming of the weekly timer will ALWAYS delete and overwrite the previous one.
2. How to get the Weekly Timer Settings Report:
You can get the weekly timer’s current settings and events by sending the following SMS:
9999WT.report
The unit will reply by SMS with all the time schedules in the system as in the example below:
No events are recorded for the Weekly Timer