Specifications

LightPulse Fibre Channel PCI Host Adapter How to... Page 6 of 11
file://G:\emuweb\WWWROOT\ts\fibre-channel\docs\howto pdf\index.htm 3/28/99
Adapter
1:
ALPA: 18 PCI BUS #: 00 PCI DEVICE #:
10
1. Change BIOS Boot Device/Display All Devices.
2. Change default ALPA of this Adapter.
3. Enable or Disable BIOS on this Adapter.
4. Change FC Link Timer (+ Advanced Option +)
5. Changed Extended Link Service Timer (+ Advanced Option +)
6. Enable or Disable Individual Devices (+ Advanced Option +)
7.
Change PLOGI Retry Timer (+ Advanced Option +)
8. Topology Selections (+ Advanced Option +)
9. Fabric Boot (+ Advanced Option +)
Enter a Selection:
Enter <F7> to Exit
<F6> to
Default
Values
<PageUp> to Previous
Menu
5. Type <1> and press <Enter> to display all devices.
6. Enter the two digit number (01, 02, etc.) to specify the boot device.
The Boot Device ALPA information at the top of the menu changes to reflect your
entry.
7. Press <PageUp> to return to the previous menu.
8. Type <3> and press <Enter> to enable Boot BIOS on the adapter.
9. Type <1> and press <Enter> to enable BIOS on the selected drive (if not already
enabled).
10. Press <F7> to exit Boot BIOS.
11. Select <Y> to reboot.
Return to top of page.
Format the Fibre Channel Drive
Caution
Ensure that the system IDE or SCSI hard drive is