Specifications

Apply Power
Verify that the host adapter is securely installed in the computer.1.
Verify that correct media is attached.2.
Plug in and turn on computer.3.
Observe LEDs for Power On Self Test (POST) results.4.
View LEDs
Green and yellow display lights (LEDs) can be seen through openings in the host
adapter's mounting bracket. Green indicates power and yellow signifies port
activity.
POST conditions and results are summarized in this table.
Green
LED
Yellow
LED State
OFF OFF Wake−up failure (dead board)
OFF ON POST failure (dead board)
OFF Slow blink (1 Hz) Wake−up failure (dead board)
OFF Fast blink (4 Hz) Failure in POST (dead board)
OFF Flashing (irregular) POST processing in progress
ON OFF Failure while functioning
ON ON Failure while functioning
ON Slow blink (1 Hz) Normal − link up
ON Fast blink (4 Hz) Normal − Updating firmware or driver initializing
Blink OFF Normal − link down or not yet started
Emulex Drivers, Software and Manuals
7