Specifications

Installation
Caution Emulex LightPulse Host Bus Adapters (HBAs) contain
electronic components that can be damaged by static
electricity through an electrostatic discharge (ESD) event. To
prevent ESD damage, maintain frequent contact with any
grounded metal surface. A grounding wrist strap is useful for
this purpose. Handle the card carefully at all times and
preferably by the edges. Avoid touching electronic
components and keep the card in the original packaging until
you are ready for installation.
Compatibility
Software
Environments
Windows Server 2003, Windows 2000, Windows NT, Linux,
NetWare
Hardware
Environments
x86 PCI hardware platforms
Prerequisites
One open 32−bit or 64−bit PCI bus slot with a 3.3 VDC or 5.0 VDC
signaling interface
•
Maximum PCI bus clock rate of 33 MHz•
Media and connectors (user supplied)•
Multimode fiber optic cable (50/125 µ m or 62.5/125 µ m) with
dual SC connectors, used with short wave lasers
♦
Copper duplex cabling with DB9 connectors (also called DE9)♦
Emulex Drivers, Software and Manuals
3