Installation guide
78
EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux Environment
Installing and Configuring the Linux Host with the Emulex Driver
5. To install the application kit, change to the directory and run the
installation script.
cd /home/emulex_apps/enterprise_kitfiles
./install
The output from running the installer script is as follows:
[root@l82bi250 emulex_apps]# ./install
Untarring EmlxApps tgz file...
Untarring lpfcutil tgz file...
Untarring hbaapi libs tgz file...
Untarring lputil tgz file...
Stopping HBAnyware Remote Management Server
Stopping HBAnyware Discovery Server
Starting HBAnyware Remote Management Server
Untarring HBAnyware local jre...
HBAnyware installation complete.
Cleaning up...
6. HBAnyware is a GUI-based application so the console may not be
used. To start up the HBAnyware application, run the following
commands:
cd /usr/sbin/hbanyware
./hbanyware