Installation guide

62
EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux Environment
Installing and Configuring the Linux Host with the Emulex Driver
01: lun-queue-depth 1 80 1e 1e 1 4
02: scan-down 0 1 1 1 1 4
03: nodev-tmo 0 ff 1e 14 1 1
04: topology 0 6 0 2 1 4
05: link-speed 0 2 0 2 1 4
06: fcp-class 2 3 3 3 1 4
07: use-adisc 0 1 0 0 1 1
08: ack0 0 1 0 0 1 4
09: fcp-bind-method 1 4 2 2 1 4
0a: cr-delay 0 3f 0 0 1 4
0b: cr-count 1 ff 1 1 1 4
0c: fdmi-on 0 2 0 0 1 4
0d: discovery-threads 1 40 1 20 1 4
0e: max-luns 1 8000 100 100 1 4
0f: scsi-req-tmo 0 ff 1e 1e 1 1
host:/usr/sbin/hbanyware # ./hbacmd portAttrib 10:00:00:00:c9:3d:e3:3b
Port Attributes for 10:00:00:00:c9:3d:e3:3b
Node WWN : 20 00 00 00 c9 3d e3 3b
Port WWN : 10 00 00 00 c9 3d e3 3b
Port Symname :
Port FCID : 611413
Port Type : Fabric
Port State : Operational
Port Service Type : 12
Port Supported FC4 : 00 00 01 20 00 00 00 01
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
Port Active FC4 : 00 00 01 00 00 00 00 01
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
Port Supported Speed: 2 GBit/sec.
Port Speed : 2 GBit/sec.
Max Frame Size : 2048
OS Device Name : /sys/class/scsi_host/host0/1
Num Discovered Ports: 2
Fabric Name : 10 00 08 00 88 60 d0 6b