Installation guide

Installing and Configuring the Linux Host with the Emulex Driver

Invisible Body Tag

This chapter describes the procedures for installing an

EMC-approved Emulex host bus adapter (HBA) into a Linux host.

Refer to the EMC Support Matrix for the most up-to-date information

on approved adapters and drivers.

◆ Installation instructions for the Emulex v8.x-series driver.......... 44

◆ Uninstalling the Emulex v8.x-series driver.................................... 56

◆ Exercising the Emulex v8.x-series device driver........................... 57

◆ Installation instructions for the Emulex v7.x-Series driver ......... 63

◆ Uninstallation of the Emulex v7.x-Series driver............................ 79

◆ Installing the Emulex HBAnywhere applications kit................... 84

◆ Editing the configuration files.......................................................... 87

◆ Using the Emulex lun_scan script................................................... 94

Installing and

Configuring the Linux

Host with the Emulex

Driver