Installation guide

(CLARiiON Only): Linux Navisphere Agent requirement for RHEL 3.0 Intel Itanium systems
179
Special Instructions
(CLARiiON Only): Linux Navisphere Agent requirement for RHEL
3.0 Intel Itanium systems
The Navisphere Agent/CLI RPM is supported on RHEL 3.0 IA64
hosts. However,
glibc-2.3.2-95.27 or later must be installed on the
system in order for the Navisphere Agent/CLI RPM pkacage to
install successfully on RHEL 3.0 IA64.
Note that the
x86-compat-libs RPM package that was required for
RHEL 2.1 [IA64] is not available or necessary for RHEL 3.0 [IA64].
The following is RPM query and installation output from a RHEL 3.0
[IA64] host:
[root@l82bi021 /]# rpm -q compat-glibc
package compat-glibc is not installed
[root@l82bi021 /]# rpm -q x86-compat-libs
package x86-compat-libs is not installed
[root@l82bi021 /]# rpm -q compat-glibc.7x
package compat-glibc.7x is not installed
[root@l82bi021 /]# rpm -qa | grep compat
compat-libstdc++-7.3-2.96.128
[root@l82bi021 /]# rpm -qa | grep glibc
glibc-2.3.2-95.30
glibc-devel-2.3.2-95.30
glibc-2.3.2-95.30
glibc-headers-2.3.2-95.30
glibc-profile-2.3.2-95.30
glibc-common-2.3.2-95.30
glibc-kernheaders-2.4-8.34.1
glibc-utils-2.3.2-95.30
[root@l82bi021 /]# ls /emul
ia32-linux ia32-Linux
[root@l82bi021 /]# rpm -ivh Navisphere Agentcli-6.7.0.4.7-1.i386.rpm
Preparing... ########################################### [100%]
1:Navisphere Agentcli ########################################### [100%]
[root@l82bi021 /]# rpm -ivh Navisphere Agentcli-6.16.0.4.63-1.i386.rpm
Preparing... ########################################### [100%]
1:Navisphere Agentcli ########################################### [100%]