Operating instructions

VOICE DEFINITION MODULE

Fig. VDEF-10

6. After finding good loop S and L points, see if Autoloop can produce an even

better loop. Press YES at any point during the looping process to invoke

Autoloop.

Note: The Emulator II is very intelligent, but not quite as hip as a human. So,

sometimes it will choose the correct splice point from a technical standpoint, not

a musical one. Therefore, if you find a good splice point, write down the S and L

numbers before invoking Autoloop. That way, if by some chance Autolooping

produces an inferior splice point, you can regain your original setting (or close to

it) by moving the sliders.