Operating instructions

GENERAL INSTRUCTIONS

Write-Protecting Disks

Write-protecting a disk turns off the disk drive’s ability to record on to the disk, thus preventing

accidental erasure. To write-protect a disk, fold a small adhesive tab (usually supplied with the

disk) over both sides of the disk so that the write-protect notch (see Fig. GENINS-1 is

completely covered (see Fig. GENINS-2). As long as the notch is covered, you will not be able

to accidentally record over the disk.

If you try to write on a disk and cannot, check whether it is write-protected before proceeding.

Fig. GENINS-1

Fig. GENINS-2