Operating instructions

GENERAL INSTRUCTIONS

1 - SELECTING THE CURRENT PRESET

This function chooses one of the available Bank Presets.

1. With no modules active, the display will show the Current Preset name and number. The

blinking cursor will appear under the first digit of the Preset number.

2. To change the Current Preset, enter a two-digit number with the keypad. If you enter a

number for which there is no Preset, the display lower line will give the illegal Preset

number and say NOT FOUND. Try again.

3. To determine the Current Preset at any time, de-activate any active modules. The

Current Preset name and number will show in the display.