Operating instructions

APPENDICES
© 1985, 1986, 1987 E-mu Systems, Inc. Page 221
Filter Default Range
1A Frequency 120 000 to 120
1B Q00 00 to 99
1C Envelope Amount +00 -50 to +50
2A LFO Amount 00 00 to 15
2B Keyboard Tracking 1.00 .00 to 1.87
3A Attack 01 01 to 32
3B Decay 32 01 to 32
3C Sustain 01 01 to 32
3D Release 32 01 to 32
0 Change Curr Voice * *
VCA/LFO Default Range
1A Attack 01 01 to 32
1B Decay 32 01 to 32
1C Sustain 01 01 to 32
1D Release 16 01 to 32
2A LFO Rate 82 01 to 99
2B LFO Delay 00 00 to 99
2C LFO Variation 00 00 to IS
2D LFO → VCA 00 00 to IS
0 Change Curr. Voice * *
Voice Definition Default Range
11A, B Truncate Start 000000 Dependent on sample
11C, D Truncate End 000000 Dependent on sample
12A, B Loop Start 000004 Dependent on sample
12C, D Loop Length Sample length Dependent on sample
13 Loop NO yes-no
14A, B Splice Point I1 End of 1st Dependent on sample
14C, D Splice Point 2 000000 Dependent on sample
21A Vel VCA Level 00 00 to 15
21B Vel → VCA Attack 00 00 to 15
22A Vel → VCF Freq 00 00 to 15
22B Vel → VCF Attack 00 00 to 15
22C Vel → VCFQ +00 -15 to +15
23A Vibrato Depth 00 00 to 15
24A Voice Attenuation -00 dB -00 to -48 dB
24B Voice Tuning +00 Cents -50 to +48 Cents
25 Solo Mode NO yes-no
26 Loop in Release YES yes-no
27 Backwards Mode NO yes-no
28 Combine Voices * *
29 Control Enable
Pitch YES yes-no
LFO to Pitch YES yes-no
LFO to Filter YES yes-no
LFO to VCA YES yes-no
Filter YES yes-no