Operating instructions

SEQUENCER MODULE

SETUP 1 - Function: SELECT TRACK

Before recording or punching-in, use this function to specify the track on which

you want to record or punch.

1. With the SETUP sub-module active, key in 1. If you are calling up this function for

the first time, the display gives the default track record assignment:

Tracks: 1

Record ^

The caret in the bottom line indicates the track on which you will record.

If you have already recorded some tracks, their track numbers will appear in the

display. An asterisk will appear under the recorded tracks, which have been cued

(see SEQUENCER SETUP 4), and the caret will appear under the lowest-

numbered empty track. For example, suppose you had already recorded tracks

2, 3, 4, and 7, and that these were set up to be cued. The display would read:

Tracks: 1 2 3 4 7

Record ^ * * * *

2. To select a record track, simply key in its number with the keypad. If you choose

an already recorded track, you will overwrite what’s on that track. To continue

with the setup process, press ENTER to return to the Module Identifier, then

select the next function (SEQUENCER SETUP 2).