Operating instructions

HARD DISK SUPPLEMENT

DISK 2 - GETTING A BANK FROM HARD DISK

This function loads Banks from the Hard Disk into the Emulator II.

1. GET BANK DISK 1 reads a Bank from the floppy drive. To get a Bank from the Hard

Disk, enter the Disk module and key in 2 (GET BANK DISK 2).

The display says:

Get HD Bank #

(02 - 47)/Slider A

Move Slider A to catalog the Hard Disk Banks. When the display shows the Bank to be

loaded, press ENTER. Alternately, enter a two-digit Bank number from 02 to 47 (leading

zeroes must be entered) from the keypad. There is no need to press ENTER if you enter

the Bank number directly.

2. After completing step 1, the display will say:

Loading Bank

Get nn (name of preset)

...where nn is the Bank number. Loading is complete in about 2 seconds.