Operating instructions

DISK MODULE

...depending on whether you are formatting a Performance (Pert) or Library (Libr)

disk. This is your last chance to stop the formatting process; remember,

formatting erases EVERYTHING on a disk, so think twice before pressing YES.

(If you press NO, the display returns to the Module Identifier.) After pressing

YES, the display says:

Formatting in

Progress . . .

Formatting takes just enough time that you can get a drink of water or do a

couple of sit-ups. After formatting is complete, the display asks:

Format Another

Disk? Yes/No

To format another disk, remove the newly formatted disk from Drive 2, insert and

latch the next disk to be formatted in Drive 2, and then press YES. Otherwise,

press NO, at which point the display returns to the Module Identifier.