Operating instructions

DISK MODULE

7 - SAVE BANK

After you’ve developed a great Bank, this function saves it to a Performance disk.

Remember -- Save whenever you have something you don’t want to accidentally

lose.

1. Insert and latch a previously formatted Performance disk in either drive. If the

disk already contains a Bank, saving a new Bank will erase the old Bank.

2. With the Disk module active, key in 7 to SAVE BANK. The display asks:

Which Drive?

Press 1or 2

3. Tell it which drive to save to by pressing 1 or 2 then proceed to step 4. With

single-drive Emulator us, press YES to continue the saving process.

4. Regardless of whether you have a single- or dual-drive Emulator II, the display

will now tell you that:

This Will Take

A While

5. After saving the Bank, the display returns to the Module Identifier. Either enter a

new number to do more disk tricks, or de-activate the Disk module.