Operating instructions

PRESET DEFINITION MODULE

31 - COPY/RENAME PRESET

This function copies a Preset to another Preset number. Since the second Preset is an

exact duplicate of the original Preset, changing a Voice parameter in the copied Preset

will change that Voice in the original, and vice-versa. To copy a Preset and renumber the

Voices at the sane tide, thus allowing for independent Voice modification, see PRESET

DEFINITION 32.

Application: To create a modified version of an existing Preset (assuming that these

modifications do not require changing the Voice parameters); for example, to store different

arpeggiator settings with the same Preset. To rename an existing Preset by copying it to itself.

To create a Preset which requires a similar, but not identical, Voice assignment to an existing

Preset.

1. With the module active, key in 31. The display says:

Copy Preset

(01 – 99)/Slider A

...and the ENTER light will be flashing. Either use the keypad to specify the Preset

number to be copied, or move Slider A to catalog (see GENERAL INSTRUCTIONS 7)

the Bank Presets. When the display shows the desired Preset, press ENTER.

2. The display now says:

Copy Preset XX

Into Preset YY

...where XX is the Preset number you chose in step 1. Use the keypad to enter the

copy’s Preset number - YY. After entering, the display will confirm your choice and the

ENTER LED will flash. Press ENTER to copy the Preset.

3. The display now asks:

PYY

Rename? Y/N

…where YY is the Preset number you are copying into. If you don’t want to rename,

press NO. To rename, press YES.

Slider B positions the cursor under the letter you want to change, while Slider A chooses

between lower case letters, capital letters, numerals 0 - 9, #, and space (top slider

position). Continue positioning the cursor and entering letters until the name is complete.

To exit to another function, see GENERAL INSTRUCTIONS 3.