Operating instructions

PRESET DEFINITION MODULE
© 1985, 1986, 1987 E-mu Systems, Inc. Page 109
14 - ERASE SEQUENCE
This command erases a specified Sequence from the Bank.
Application: Erase an unneeded Sequence, or free up more memory space.
1. With the module active, key in 14. The display says:
Erase Seque
(01- 99 )/Slider A
...and the ENTER light will be flashing. Either use the keypad to specify the Sequence
number to be erased, or move Slider A to catalog (see GENERAL INSTRUCTIONS 7,
“Cataloguing”) the Bank Sequences. When the display shows the Sequence number to
be erased, press ENTER.
2. The Emulator II wants to make sure you really do want to erase the Sequence, so it
asks:
EraseSequenceXX
You Sure? Y/N
...where XX is the previously selected Sequence number. If you have any doubts about
the wisdom of erasing the Sequence, press NO. Otherwise, press YES to erase the
Sequence. Pressing either YES or NO returns you to the Module Identifier.