Operating instructions

PRESET DEFINITION MODULE

13 - ERASE VOICE

This command erases a specified Voice from the Bank. Caution: Once erased, a Voice

will be gone from any Preset in which it appears.

Application: Erase an improperly sampled or unneeded Voice, or free up more memory.

1. With the module active, key in 13. The display says:

Erase Voice

(01 – 99)/Slider A

...and the ENTER light will be flashing. Either use the keypad to specify the Voice

number to be erased, or move Slider A to catalog (see GENERAL INSTRUCTIONS 7)

the Bank Voices. When the display shows the Voice number to be erased, press

ENTER.

2. The Emulator II wants to make sure you think twice before blanking out parts of its

memory, so it asks:

Erase Voice VXX

You Sure? Y/N

...where VXX is the previously selected Voice number. If you have any doubts about the

wisdom of erasing the Voice, press NO. Otherwise, press YES to erase the Voice.

Pressing either YES or NO returns you to the Module Identifier.