User's Manual

Page 3 of 12
Document # E.0015.16.07 443713.DOC
1 IntegrAlarm Overview
The IntegrAlarm wireless security system includes a Control Panel and a number of
wireless peripheral units. The system operates on the ISM wireless band of 902-928 MHz,
in frequency hopping mode, transmitting short (about 10 ms) packets of data, with each
packet transmitted on a different frequency. The system operates on 56 pseudo random
selected channels. Time and frequency synchronization is maintained by a
synchronization signal transmitted by the system Control Panel to the various peripherals
(including the IA SRN-1) every 3 minutes. The IntegrAlarm system is a two-way
communication system; every data or command packet is validated using a high level of
error detection code (CRC) and acknowledged back to the transmitting source. Automatic
repeat request (ARQ) is provided in case of unacknowledged data or command packet.
In its present configuration, the system includes five types of peripheral units:
• Door / window magnetic sensor.
• PIR motion detector.
• Smoke detector.
• 5-function key fob (handheld remote control).
• Remote siren / strobe.
This manual is devoted to the installation instructions for the IntegrAlarm IA SRN-1
siren/strobe unit.
The installation instructions for the other IntegrAlarm peripherals and the IntegrAlarm
Control Panel appear in the User and Installer Manuals for the respective units.