User's Guide

Page 42 of 46
Document # E.0015.16.02 406985
Location:
MASTER BEDROOM
Pressing OK again restores the display of the event in question.
To leave any category and return to the Event Logger opening screen,
press ESC. To leave the Event Logger function, press ESC again.
3.6.3 Access Codes
This function is used to set Master ID, User ID and special ID code
numbers.
From the Master Menu, use arrow keys at top of Control Panel to scroll to
the Access Codes function. Screen will show:
MASTER MENU
3. Access Codes
Press OK. Screen will show:
ACCESS CODES
1. Master Code
To confirm or adjust master code, press OK. Screen will show:
01: MASTER CODE
1111
Use numeric keypad at center of Control Panel to adjust master code and
press OK, or simply press OK to confirm master code. The ACCESS
CODES screen will again be displayed.
To confirm or adjust user codes, press DOWN arrow key until screen
shows:
ACCESS CODES
2. User Codes
Press OK. Screen will show:
01: 1st USER CODE
1111