User's Guide

Page 37 of 46
Document # E.0015.16.02 406985
02: DATE mm-dd-yy
followed by the date. Use numeric keypad at center of Control Panel to
adjust date and press OK. Screen will show:
03: 24 HOUR CLOCK
Yes
If 24-hour clock is desired, press OK. If not, use arrow keys at top of
Control Panel to change "Yes" to "No" and then press OK.
To leave the Adjust Clock function, press ESC.
3.6.2 Event Logger
To view a history of alarms, arming/disarming operations, bypasses set
and cleared, trouble (malfunctions) and miscellaneous events (low
battery alerts for sensors, etc.), press OK from the Main Menu. The User
Menu will be displayed:
MASTER MENU
2: EVENT LOGGER
Press OK. Screen will show:
EVENT LOGGER
1. All events
To select a display of all events (Alarm/Restore, Arm/Disarm, Bypass,
Trouble and
Misc. Events), press OK.
If there are no events at all recorded in the system, screen will show:
NO EVENTS
If there are any events, screen will show the most recent event. (Note:
screens depicting events are shown in the paragraphs below.) Use arrow
keys at top of Control Panel to scroll through events.
To select a specific type of event
(Alarm/Restore, Arm/Disarm, Bypass.
Trouble or Misc. Events), use arrow keys at top of Control Panel to scroll
to the desired type of event.