User's Guide

Page 28 of 46
Document # E.0015.16.02 406985
To remove trouble report from display and return to opening screen,
press Esc.
3.5 Additional User Functions
In addition to the arm/disarm and numeric keypad functions described
above, the IntegrAlarm enables a wide range of other functions. Some of
these can be implemented by any user; others can only be implemented
by the user predefined as Master.
Master functions are discussed in Section 2.6 below.
If an ordinary User ID or an incorrect code is entered for any Master
function, or if an incorrect code is entered for any User function, an
INCORRECT ID prompt will be displayed and an "Incorrect ID" voice
prompt will sound. After 1 second, an ENTER ID prompt will be displayed
and an "Enter ID" voice prompt will sound. (Note
: After three incorrect ID
entries, the system will respond with an INCORRECT ID prompt and an
"Incorrect ID" voice message, followed by an ACCESS DENIED prompt
and an "Access Denied" voice message, and access to the system from
the control panel will be denied for a preprogrammed interval of time.)
These functions are viewed from the Main Menu. To access the Main
Menu, press OK at top of Control Panel when the system is disarmed.
Screen will show:
MAIN MENU
1: USER
An ENTER ID prompt will be displayed and an "Enter ID" voice prompt
will sound.
Enter your User ID.
If the User ID has been correctly entered, screen will show:
USER MENU
1. ZONE BYPASS
(Note: At any point in Section 3.5, pressing OK at top of Control Panel will
move one level downward in the menu structure; pressing ESC at top of
Control Panel will move one level upward in the menu structure.)