User's Guide

Page 27 of 46
Document # E.0015.16.02 406985
MUTE SPEAKER
* ON
From this point on, voice prompts will not sound at any stage until muting
is removed.
To remove muting, press * and 4 again. Screen will show:
MUTE SPEAKER
* OFF
3.4.5 Operating PGM Units
To change the state of any PGM unit (to turn it ON if it is OFF or OFF if it
is ON), press * and 5 on the numeric keypad at center of Control Panel.
Screen will show:
PGM No: 1
APPLIANCE 1
Use arrow keys at top of Control Panel to scroll to the desired PGM unit
number and press OK at top of Control Panel.
A voice prompt will sound: "APPLIANCE [x] OPEN" if the appliance has
been turned ON, and "APPLIANCE [x] CLOSED" if the appliance has
been turned OFF ([x] = appliance number).
3.4.6 View Alarm History
To view a history of the last 16 system alarms, press * and 8 on the
numeric keypad at center of Control Panel. Screen will show the date,
time and type of alarm, and an appropriate voice prompt will sound.
To remove alarm history from display and return to opening screen, press
Esc.
3.4.7 Trouble Report
To obtain a report of trouble in system when FAULT LED is flashing,
press * and 0 on the numeric keypad at center of Control Panel. Screen
will show the date, time and type of trouble, and an appropriate voice
prompt will sound.