User's Guide

Page 25 of 46
Document # E.0015.16.02 406985
Code Function Comments
[*] [8] Disable all sirens Indoor, outdoor and buzzer.
[*] [9] Help Activates the first help sentence. Pressing
[#] plays the next sentence.
[*] [3] “Listen-in” function
[*] [1] “Speak-out” function
Allows user to listen to the premises or talk
to the inhabitants. Any other command
terminates listen-in or speak-out modes.
Valid for PSTN only.
[*] [99] Disconnect End of remote telephone session. Valid for
PSTN only.
[*] [*] [1]
[*] [*] [2]
[*] [*] [3]
Fire alarm
Panic alarm
Medical alarm
Valid for cordless telephone only.
3.4 Numeric Keypad Shortcut Functions
When the system is disarmed
, a number of functions can be performed
by any user, by means of the numeric keypad at center of control panel.
3.4.1 Setting Voice Message Volume
To increase voice message volume, press * and the UP arrow above the
numeric keypad at top of Control Panel.
To decrease, press * and the DOWN arrow above the numeric keypad at
top of Control Panel.
3.4.2 Operating X-10 Units
To change the state of any X-10 unit (to turn it ON if it is OFF or OFF if it
is ON), press * and 2 on the numeric keypad at center of Control Panel.
Screen will show: