User's Guide

Page 24 of 46
Document # E.0015.16.02 406985
To summon assistance by means of a Fire alert from cordless
telephone only, dial **1. The system will transmit a pre-recorded "Fire"
message to the monitoring station.
To summon assistance by means of a Panic alert from cordless
telephone only, dial **2. The system will transmit a pre-recorded "Panic"
message to the monitoring station.
To summon assistance by means of a Medical alert from cordless
telephone only, dial **3. The system will transmit a pre-recorded
"Medical" message to the monitoring station.
After completing all desired operations from PSTN only, dial *99. A
"Goodbye" voice prompt will sound, and the call to the alarm system will
be disconnected. (To terminate use of cordless telephone, just hang up.)
A summary of commands that can be used from cordless or remote
telephones appears in the following table.
Code Function Comments
[*] [10] Disarm system
[*] [11]
[*] [12]
Away
Instant Away
Arms perimeter and interior zones, with
entry/exit delay.
Arms perimeter and interior zones, without
entry/exit delay.
[*] [13]
[*] [14]
Home
Instant Home
Arms perimeter zones only, with entry
delay.
Arms perimeter zones only, without entry
delay.
[*] [15] Report status
[*] [6] [x] Activate PGM/X10
module x
x= 1 to 8 for X10, x= 9 to 10 for PGM
[*] [7] [x] Deactivate PGM/X10
module x
x= 1 to 8 for X10, x= 9 to 10 for PGM