Installation Guide

Page 67 of 67 pages
Document # E.0015.16.03 406984
press OK at top of Control Panel (if Enable is displayed, press OK at
top of panel to change to Disable) and then press DOWN key at top
of Control Panel.
On conclusion of all sub-functions (when sub-function 01 is again
displayed), press ESC to return to Others menu. Now press ESC
again to complete the installation and programming process.
3.2.13 Saving Data
When all of the options in Sections 3.2.1 through 3.2.12 above have
been completed and ESC has been pressed at the end of Section
3.2.12, the following screen will be displayed:
SAVE DATA?
*No - x↵ Yes - ↵
Press ESC to return to the opening screen without saving data or
OK to save data and return to the opening screen. If OK is pressed,
screen will briefly show:
PLEASE WAIT…
SAVING DATA
Screen will then return to original display.
This concludes the IntegrAlarm installation and programming
process.