Installation Guide

Page 58 of 67 pages
Document # E.0015.16.03 406984
01: COD. FALSE B9
Code Cancel DB ↵
To confirm the hexadecimal codes which will indicate in the report
that a false code event has occurred and that the code has
subsequently been canceled, press DOWN at top of Control Panel.
To change the default, key in the desired codes on numeric keypad
and press OK and then DOWN at top of Control Panel to proceed to
next sub-function. Screen will show:
02: TEST CODE DA
CP Reset DC ↵
To confirm the hexadecimal codes which will indicate in the report
that a test code event has occurred and that the Control Panel has
subsequently been reset, press DOWN at top of Control Panel. To
change the default, key in the desired codes on numeric keypad and
press OK and then DOWN at top of Control Panel to proceed to next
sub-function. Screen will show:
03: INSTALLATION
Entry D8 Exit D9↵
To confirm the hexadecimal codes which will indicate in the report
that the installation process has begun and has been concluded,
press DOWN at top of Control Panel. To change the default, key in
the desired codes on numeric keypad and press OK and then
DOWN at top of Control Panel to proceed to next sub-function.
Screen will show:
04: TAMPER EV. DD
Restore DE ↵
To confirm the hexadecimal codes which will indicate in the report
that tampering with the Control Panel has occurred and that the
system has subsequently been restored to normal operation, press
DOWN at top of Control Panel. To change the default, key in the
desired codes on numeric keypad and press OK and then DOWN at
top of Control Panel to proceed to next sub-function. Screen will
show: