Installation Guide

Page 56 of 67 pages
Document # E.0015.16.03 406984
REPORTING CODES
7. Arm / Disarm
Press OK at top of Control Panel. Screen will show:
01: 1st USER
Arm A1 Dsarm C1 ↵
To confirm the hexadecimal codes which will indicate in the report
that User 1 has armed (AWAY) and has subsequently disarmed the
system, press DOWN at top of Control Panel. To change the default,
key in the desired codes on numeric keypad and press OK and then
DOWN at top of Control Panel to proceed to next sub-function.
Screen will show:
02: 2nd USER
Arm A2 Dsarm C2 ↵
Repeat the process described in the previous paragraph for this
sub-function and each of the following sub-functions:
03: 3rd USER
04: 4th USER
05: 5th USER
06: 6th USER
07: MASTER
08: 1st ONE TIME
09: 2nd ONE TIME
10: DURESS
11: REMOTE ARM
12: AUTO
13: FORCE ARM / QUICK ARM
14: HOME ARM
On conclusion of all sub-functions (when sub-function 01 is again
displayed), press ESC to return to Arm / Disarm menu. Now press
DOWN at top of Control Panel to proceed to the next sub-function,
Maintenance
.
Screen will show:
REPORTING CODES
8. Maintenance