Installation Guide

Page 55 of 67 pages
Document # E.0015.16.03 406984
To confirm the hexadecimal codes which will indicate in the report
that a panic event has occurred and that the system has
subsequently been restored to normal operation, press DOWN at
top of Control Panel. To change the default, key in the desired codes
on numeric keypad and press OK and then DOWN at top of Control
Panel to proceed to next sub-function. Screen will show:
02: MEDICAL EV. B3
Restore B4 ↵
To confirm the hexadecimal codes which will indicate in the report
that a medical event has occurred and that the system has
subsequently been restored to normal operation, press DOWN at
top of Control Panel. To change the default, key in the desired codes
on numeric keypad and press OK and then DOWN at top of Control
Panel to proceed to next sub-function. Screen will show:
03: FIRE EV. B5
Restore B6 ↵
To confirm the hexadecimal codes which will indicate in the report
that a fire event has occurred and that the system has subsequently
been restored to normal operation, press DOWN at top of Control
Panel. To change the default, key in the desired codes on numeric
keypad and press OK and then DOWN at top of Control Panel to
proceed to next sub-function. Screen will show:
04: DURESS EV. B7
Restore B8 ↵
To confirm the hexadecimal codes which will indicate in the report
that a duress event has occurred and that the system has
subsequently been restored to normal operation, press DOWN at
top of Control Panel. To change the default, key in the desired codes
on numeric keypad and press OK and then DOWN at top of Control
Panel.
On conclusion of all sub-functions (when sub-function 01 is again
displayed), press ESC to return to Emerg. Alarm menu. Now press
DOWN at top of Control Panel to proceed to the next sub-function,
Arm / Disarm
.
Screen will show: