Installation Guide

Page 50 of 67 pages
Document # E.0015.16.03 406984
09: DIAL ATTEMPTS
3 ↵
If 3 is the correct number of dial attempts, press DOWN key at top of
Control Panel to proceed to next sub-function.
To change the number of dial attempts
, press OK at top of Control
Panel. The "3" will blink. Using the numeric keypad like a cellular
telephone keypad, change the "3" to the desired digit or series of
digits. Now press DOWN key at top of Control Panel to proceed to
next sub-function.
Screen will show:
10: ATTEMPTS DELAY
10
If 10 is the correct number of seconds for delay between dial
attempts, press DOWN key at top of Control Panel to proceed to
next sub-function.
To change the number of seconds for delay
, press OK at top of
Control Panel. The "1" of 10 will blink. Using the numeric keypad like
a cellular telephone keypad, change the "1" to the desired digit. Now
the "0" of 10 will blink. Change the "0" to the desired digit. If
necessary, add a digit or series of digits in order to complete the
number. Now press DOWN key at top of Control Panel to proceed to
next sub-function.
Screen will show:
11: CS RETRIES
3 ↵
If 3 is the correct number of attempts to send message after Central
Station has answered, press DOWN key at top of Control Panel to
proceed to next sub-function.
To change the number of retry attempts
, press OK at top of Control
Panel. The "3" will blink. Using the numeric keypad like a cellular
telephone keypad, change the "3" to the desired digit or series of
digits. Now press DOWN key at top of Control Panel to proceed to
next sub-function.