Installation Guide

Page 49 of 67 pages
Document # E.0015.16.03 406984
press DOWN key at top of Control Panel to proceed to next sub-
function. Screen will show:
05: DSBL WAITING
Disable ↵
To disable waiting time and proceed to the next communications
option, press DOWN key at top of Control Panel. To change the
default from Disable to Enable, press OK at top of Control Panel (if
Enable is displayed, press OK at top of panel to change to Disable)
and then press DOWN key at top of Control Panel to proceed to
next sub-function. Screen will show:
06: DIAL TYPE
Tone ↵
To confirm that the dial type is Tone and proceed to the next
communications option, press DOWN key at top of Control Panel. To
change the default from Tone to Pulse, press DOWN key at top of
Control Panel (if Pulse is displayed, press UP key at top of panel to
change to Tone) and then press OK at top of Control Panel to
proceed to next sub-function. Screen will show:
07: BLIND DIAL
Disable ↵
To disable blind dialing and proceed to the next communications
option, press DOWN key at top of Control Panel. To change the
default from Disable to Enable, press OK at top of Control Panel (if
Enable is displayed, press OK at top of panel to change to Disable)
and then press DOWN key at top of Control Panel to proceed to
next sub-function. Screen will show:
08: CALL PROGRESS
Disable ↵
To disable the call progress option and proceed to the next
communications option, press DOWN key at top of Control Panel. To
change the default from Disable to Enable, press OK at top of
Control Panel (if Enable is displayed, press OK at top of panel to
change to Disable) and then press DOWN key at top of Control
Panel to proceed to next sub-function. Screen will show: