Installation Guide

Page 48 of 67 pages
Document # E.0015.16.03 406984
COMMUNICATIONS
3. Communicator
Press OK at top of Control Panel. Screen will show:
01: COMMUNICATOR
Disable ↵
To disable the Communicator and proceed to the next
communications option, press DOWN key at top of Control Panel. To
change the default from Disable to Enable, press OK at top of
Control Panel (if Enable is displayed, press OK at top of panel to
change to Disable) and then press DOWN key at top of Control
Panel to proceed to next sub-function. Screen will show:
02: CTRL STATION
Disable ↵
To disable the Central Station and proceed to the next
communications option, press DOWN key at top of Control Panel. To
change the default from Disable to Enable, press OK at top of
Control Panel (if Enable is displayed, press OK at top of panel to
change to Disable) and then press DOWN key at top of Control
Panel to proceed to next sub-function. Screen will show:
03: REMOTE ACCESS
Enable ↵
To enable remote access and proceed to the next communications
option, press DOWN key at top of Control Panel. To change the
default from Enable to Disable, press OK at top of Control Panel (if
Disable is displayed, press OK at top of panel to change to Enable)
and then press DOWN key at top of Control Panel to proceed to
next sub-function. Screen will show:
04: AUDIO VER. ENB
Disable ↵
To enable audio and proceed to the next communications option,
press DOWN key at top of Control Panel. To change the default from
Disable to Enable, press OK at top of Control Panel (if Enable is
displayed, press OK at top of panel to change to Disable) and then