Installation Guide

Page 39 of 67 pages
Document # E.0015.16.03 406984
To disable the "turn device on by timer" function and proceed to the
next PGM device option, press DOWN key at top of Control Panel.
To change the default from Disable to Enable, press OK at top of
Control Panel (if Enable is displayed, press OK at top of panel to
change to Disable) and then press DOWN key at top of Control
Panel to proceed to next sub-function. Screen will show:
06: ON AS SIREN
Disable ↵
To disable the "turn device on as siren" function and proceed to the
next PGM device option, press DOWN key at top of Control Panel.
To change the default from Disable to Enable, press OK at top of
Control Panel (if Enable is displayed, press OK at top of panel to
change to Disable) and then press DOWN key at top of Control
Panel to proceed to next sub-function. Screen will show:
07: START TIME
00:00 A
If 00:00 AM is the correct start time, press DOWN key at top of
Control Panel to proceed to next sub-function.
To change the start time
, press OK at top of Control Panel. The first
"0" will blink. Using the numeric keypad like a cellular telephone
keypad, change the "0" to the desired digit. The next "0" will then
blink. Change the "0" to the desired digit. Now do the same for the
third "0" and the fourth "0", followed by "0" for AM and "1" for PM.
Now press DOWN key at top of Control Panel to proceed to next
sub-function.
Screen will show:
08: STOP TIME
00:00 A
If 00:00 AM is the correct stop time, press DOWN key at top of
Control Panel to proceed to next sub-function.
To change the stop time
, press OK at top of Control Panel. The first
"0" will blink. Using the numeric keypad like a cellular telephone
keypad, change the "0" to the desired digit. The next "0" will then