Installation Guide

Page 38 of 67 pages
Document # E.0015.16.03 406984
01: DEVICE LABEL
*Gate ‡
To select device name for this device (Note: a list of device names
appears in the Appendix to this manual), press DOWN or UP keys at
top of Control Panel until desired device name is displayed, and
then press DOWN key at top of Control Panel to proceed to next
sub-function.
Screen will show:
02: ON BY ARMING
Disable ↵
To disable the "turn device on by arming" function and proceed to
the next PGM device option, press DOWN key at top of Control
Panel. To change the default from Disable to Enable, press OK at
top of Control Panel (if Enable is displayed, press OK at top of panel
to change to Disable) and then press DOWN key at top of Control
Panel to proceed to next sub-function. Screen will show:
03: ON BY DELAY
Disable ↵
To disable the "turn device on by delay" function and proceed to the
next PGM device option, press DOWN key at top of Control Panel.
To change the default from Disable to Enable, press OK at top of
Control Panel (if Enable is displayed, press OK at top of panel to
change to Disable) and then press DOWN key at top of Control
Panel to proceed to next sub-function. Screen will show:
04: ON BY KEYFOB
Disable ↵
To disable the "turn device on by keyfob" function and proceed to
the next PGM device option, press DOWN key at top of Control
Panel. To change the default from Disable to Enable, press OK at
top of Control Panel (if Enable is displayed, press OK at top of panel
to change to Disable) and then press DOWN key at top of Control
Panel to proceed to next sub-function. Screen will show:
05: ON BY TIMER
Disable ↵