Installation Guide

Page 37 of 67 pages
Document # E.0015.16.03 406984
02: MASTER CODE
1234 ↵
If 1234 is the desired master code, press DOWN key at top of
Control Panel to proceed to next sub-function.
To change the master code
, press OK at top of Control Panel. The
"1" in 1234 will blink. Using the numeric keypad like a cellular
telephone keypad, change the "1" to the desired digit. The "2" will
then blink. Change the "2" to the desired digit. Do the same for the
"3" and the "4"
On conclusion of all sub-functions (when sub-function 01 is again
displayed), press ESC to return to Access Codes menu. Now press
DOWN key at top of Control Panel to proceed to the Output Options
menu.
3.2.5 Output Options
From the Access Codes menu as shown in Section 3.2.4 above,
press DOWN key at top of Control Panel. Screen will show:
INSTALLER MENU
5: OUTPUT OPTIONS
This defines the output options for the PGM devices used for the
system. To view the options for the first PGM device, press OK at
top of Control Panel. Screen will show:
PGM No: 1
GATE
To confirm 1 as the current device number, press OK at top of
Control Panel. Screen will show:
01: DEVICE LABEL
GATE ↵
If Gate is the correct device name for this device, press DOWN key
at top of Control Panel to proceed to next sub-function.
To change the device name, press OK at top of Control Panel. The
↵ character will be replaced by ‡. Screen will show: