Installation Guide

Page 35 of 67 pages
Document # E.0015.16.03 406984
SYSTEM OPTIONS
5. Event Log. Opt.
Press OK at top of Control Panel. Screen will show:
01: ALARM EVENTS
Enable ↵
To enable logging of alarm events and proceed to the next event
logger option, press DOWN key at top of Control Panel. To change
the default from Enable to Disable, press OK at top of Control Panel
(if Disable is displayed, press OK at top of panel to change to
Enable) and then press DOWN key at top of Control Panel to
proceed to next sub-function. Screen will show:
02: TROUBLE EVENTS
Enable ↵
To enable logging of trouble events and proceed to the next event
logger option, press DOWN key at top of Control Panel. To change
the default from Enable to Disable, press OK at top of Control Panel
(if Disable is displayed, press OK at top of panel to change to
Enable) and then press DOWN key at top of Control Panel to
proceed to next sub-function. Screen will show:
03: BYPASS EVENTS
Enable ↵
To enable logging of bypass events and proceed to the next event
logger option, press DOWN key at top of Control Panel. To change
the default from Enable to Disable, press OK at top of Control Panel
(if Disable is displayed, press OK at top of panel to change to
Enable) and then press DOWN key at top of Control Panel to
proceed to next sub-function. Screen will show:
04: LOW BATTERY
Enable ↵
To enable logging of low battery events and proceed to the next
event logger option, press DOWN key at top of Control Panel. To
change the default from Enable to Disable, press OK at top of
Control Panel (if Disable is displayed, press OK at top of panel to