Installation Guide

Page 32 of 67 pages
Document # E.0015.16.03 406984
the default from Disable to Enable, press OK at top of Control Panel
(if Enable is displayed, press OK at top of panel to change to
Disable) and then press DOWN key at top of Control Panel to
proceed to next sub-function. Screen will show:
13: RF HOUSE ID
10 ↵
If 10 is the correct RF house ID number, press DOWN key at top of
Control Panel to proceed to next sub-function.
To change the RF house ID number
, press OK at top of Control
Panel. The "1" in 10 will blink. Using the numeric keypad like a
cellular telephone keypad, change the "1" to the desired digit. The
"0" will then blink. Change the "0" to the desired digit. Now press
DOWN key at top of Control Panel to proceed to next sub-function.
Screen will show:
14: PANEL TAMPER
Enable ↵
To enable the Panel Tamper alarm option and proceed to the next
arming option, press DOWN key at top of Control Panel. To change
the default from Enable to Disable, press OK at top of Control Panel
(if Disable is displayed, press OK at top of panel to change to
Enable).
On conclusion of all sub-functions (when sub-function 01 is again
displayed), press ESC to return to Arming Options menu and press
DOWN key to proceed to next sub-function: Language
.
Screen will show:
SYSTEM OPTIONS
2. Language
Press OK at top of Control Panel. Screen will show:
01: LANGUAGE
English ↵
To change the default from English to French, press OK at top of
Control Panel (if French is displayed, press OK at top of panel to