Installation Guide

Page 26 of 67 pages
Document # E.0015.16.03 406984
TIMERS & COUNTER
1. Entry/Exit Dly
Press OK at top of Control Panel. Screen will show:
01: ENTRY DLY 1
30 seconds ↵
If 30 seconds is the correct setting for entry delay 1, press DOWN
key at top of Control Panel to proceed to next sub-function.
To change the time of entry delay 1
, press OK at top of Control
Panel. The "3" in 30 will blink. Using the numeric keypad like a
cellular telephone keypad, change the "3" to the desired digit. The
"0" will then blink. Change the "0" to the desired digit. Now repeat
the process for each of the following sub-functions:
02: ENTRY DLY 2 (default 30 seconds)
03: EXIT DLY 1 (default 45 seconds)
04: EXIT DLY 2 (default 45 seconds)
After completing each of the above sub-functions, press ESC at top
of Control Panel to return to Entry/Exit Delay menu. Now press
DOWN key at top of Control Panel to proceed to next sub-function:
Sounder Timers
.
Screen will show:
TIMERS & COUNTER
2. Sounder Timers
Press OK at top of Control Panel. Screen will show:
01: BELL TIMEOUT
4 minutes ↵
If 4 minutes is the correct setting for bell timeout, press DOWN key
at top of Control Panel to proceed to next sub-function.
To change the bell timeout setting
, press OK at top of Control Panel.
The "4" will blink. Using the numeric keypad like a cellular telephone
keypad, change the "4" to the desired digit or series of digits. Now
repeat the process for each of the following sub-functions: