Installation Guide

Page 16 of 67 pages
Document # E.0015.16.03 406984
01: ZONE ENABLE
Enable ↵
To confirm that this zone is enabled, press DOWN key at top of
Control Panel to proceed to next zone definition option. To change
the default from Enable to Disable, press OK at top of Control Panel
(if Disable is displayed, press OK at top of panel to change to
Enable) and then press DOWN key at top of Control Panel to
proceed to next sub-function: Zone Type
.
Screen will show:
02: ZONE TYPE
Delay 1 ↵
Press OK at top of Control Panel. The ↵ character will be replaced
by ‡. Screen will show:
02: ZONE TYPE
Delay 1 ‡
To select zone type for this zone (Note: a list of zone types appears
in the Appendix to this manual), press DOWN or UP keys at top of
Control Panel until desired zone type is displayed. Now press ESC
key at top of Control Panel to return to Zone Definitions menu and
press DOWN key to proceed to next sub-function: Zone Labels
.
Screen will show:
ZONE PROGRAMMING
2. Zn. Labels
Press OK at top of Control Panel. Screen will show:
ENTER ZONE # 1
FRONT DOOR
To select zone label, press OK at top of Control Panel.
01: ZONE LABEL
FRONT DOOR ↵
Press OK at top of Control Panel. The ↵ character will be replaced
by ‡. Screen will show: