Specification Sheet

Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: [phone] Fax: [phone] www.emtek.com
Standard Door Thickness: 1¾”
Standard Components:
• 1 ⁄” Threaded Cylinder
• 2” Long Spindle
• 2” Top Rosette Screw
• 1 ½” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Door Thickness: 1 ⅞”- 2 ¼”
Extended Components:
• 1 ½” Threaded Cylinder
• 2” Long Spindle
• 2 ½” Top Rosette Screw
• 2” Bottom Rosette Screw
• Thumbpress
• Strikeplate
Extended Door Thickness: 2 ⅜”- 2 ¾”
Extended Components:
• 1 ¾” Threaded Cylinder
• 2 ¼” Long Spindle
• 2 ½” Top Rosette Screw
• 2” Bottom Rosette Screw
• Extended Thumbpress
• Extended Strikeplate
Door Thickness Specifications
9
Oval Ribbon & Reed Trim Style
Part # UL 3342
17 ⁄”
2¾”
3⁄”
1⁄”
4⁄”
3⁄”
Additional Dimensions: (Part # UL 3342)
• Exterior Projection is 2 ¾”
• Interior Projection Depends on Handle Style
• Overall Grip thickness: 1 ⁄”
• Clearance between door & grip is 1
⁄”
• Plates thickness: ½”
Standard interior trim
Part # UL 3342*
3 ⁄”
Entrance Handlesets - Brass Oval Ribbon & Reed UL Mortise
Same dimensions for dummy function
* Available in Lever By
Lever/ Knob by Knob
Mortise Entrance
Handlesets. Same
dimensions as interior
trim of standard mortise
entrance handlesets.
10 ⁄”
10 ⁄”