Manualshelf

Owner's manual

ManualsBrandsEmtek ManualsFor HomeEMTouch Keypad Leversets Locksets
12345678910
8
*Locked position is required for installation and removal of the Inside
Trim Plate Assembly.
(Does not apply to Keypad Storeroom/Gate product)
*Locked - requires code
Correct for installation
Unlocked
Incorrect for installation
!
!
!
THUMBTURN MUST BE IN
LOCKED POSITION FOR
INSTALLATION.
USER CODES
ARE LOCATED
ON THE INSIDE
TRIM PLATE &
ON PAGE 11.
5. Install Inside Trim Plate
Inside
Screws (item #4c)
Fasten Inside Trim Plate using two #8-32 x ⁄” Flat Head Machine Screws
(item #4c).