Appliance and Door Pulls Parts List

Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: [phone] Fax: [phone] www.emtek.com
STANDARD/BACK TO BACK APPLIANCE AND DOOR PULLS
Appliance/Door pulls are drilled and tapped for ⁄”-16 thread to
accommodate thread adapters.
Supplied with:
• Two- Thread adapter for ¼-20 thread
• Two- ¼-20 Flat head machine screws x 1” long
• Two- Thread adapters for 10-32 thread
• Two- 10-32 Flat head machine screws x 1” long
• Two- 10-32 Flat head machine screws x 2” long
• Two- Threaded Washers
• Two- Decorative Caps
Most standard appliance pulls and door pulls are available in Back to Back
function. Fits door thickness from 1⁄” to 2¼”. Specify if thicker.
Supplied with:
• One grip with 10-32 threads in the stem
• One mating grip with ⁄” diameter hole in the stem
• Two ⁄” diameter bevel head screws with 10-32 shaft
• Two 10-32 set screws
Standard Appliance and Door Pulls
Back to Back Appliance and Door Pulls
HOW TO ORDER
BTB 86078 US10B
Add FUNCTION to the Product Code, and Finish. For example:
Function Door Pull Finish