Specification Sheet

Install Optional Soft Open/Close - Part 2
10
1. Move door to desired stop location.
2. Place soft catch under soft open/close as shown.
3. Mark location of soft catch.
4. Remove door from track
5. Install soft catch at marked location
6. Hang door on track
REV 18A 10-04-18
IN4-BARNFACEMNT
Copyright © 2018, EMTEK Products, Inc. an ASSA ABLOY Group company. All rights reserved. Reproduction in
whole or in part without the express written permission of EMTEK Products, Inc. is prohibited.
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
!