Manualshelf

Installation Guide

ManualsBrandsEmtek ManualsHandlesetDelaware Series Dummy Entry Set with 7.125 Inch Tall Backplate and Dummy Cylinder from the American Classic Collection
1
Dummy Door Prep. Active
Optional Thru Bolts
Outside
Single or Double Cylinder
Inside
Single Cylinder
Inside
Double Cylinder
1” Edge
Bore
2-1/4”
2-1/4”
1”
2-3/8” or 2-3/4”
3-5/8”
(Or 5-1/2”
For Trenton
Plates)
Installation Guide— Keyed Plates: Knob
1”
1”
Rev. 03/28/08
IN4-KEYPLTSKNB
2-1/8” Dia.
Bore
Tailpiece - Horizontal
Thru bolts (provided) may be used
on hollow doors instead of wood
screws (also provided).
After lock has been installed
tighten set screw with allen
wrench.
After lock has been installed
tighten set screw with allen
wrench.
Tailpiece - Vertical

Summary of content (1 pages)